MAD-425-I
Addressable monitor module and control with built-in isolator of 5 supervised technical inputs for the status signaling of equipment that provide NC or NO contact and 5 voltage-free relay outputs providing two non-resettable C, NO, NC contacts. It occupies 10 adressess in the loop. Requires external 24 Vdc power. LED status indicators. Connection through removable strips up to 2.5mm2 section. Includes mounting box. Dimensions: 172 x 170 x 48 mm. CPR certificate EN54-18 and EN54-17.
The range of MAD-400 modules has been developed to offer a wide and complete range of input and output ports to be used with Detnov’s addressable fire control panels. The MAD-400 modules allow performances and manoeuvres for the proper functioning of the fire detection system, monitoring and/or acting according to the needs of the installation. The MAD-400 modules have been designed to facilitate their installation process and they may be installed using screws or fitted into a DIN rail. Each module is equipped with removable terminal blocks and a LED status indicator. The addressing of the modules ir carried out through the PGD-200 programmer or auto addressing for isolator version. This range of modules consists of:
• MAD-405-I Addressable module 5 technical inputs
• MAD-409-I Addressable module 10 technical inputs
• MAD-415-I Addressable module 5 relay outputs
• MAD-419-I Addressable module 10 relay outputs
• MAD-425-I Addressable module 5 technical inputs & 5 relay outputs
• MAD-429-I Addressable module 10 technical inputs & 10 relay outputs
These modules require 24V auxiliary power (1) and are assigned a number of loop addresses according to the number of inputs and outputs available in the module Technical inputs can be configured through a micro-switch, depending on the signal type: to monitor NC or NO input. Monitoring of technical input can also be configured or not. The entire range is supplied inside the BOX-ONE box. (1) The MAD-405-I and MAD-409-I modules of technical inputs can be directly fed to the loop
° Complete range of input and output modules
° Easy installation and maintenance
° Addressing through a programmer or auto addressing
° Requieres an auxiliary 24V power supply (1)
° With isolator. Connection with polarity
° EN 54-17 and EN 54-18 approved
WRITE YOUR OWN REVIEW
How do you rate this product? *